Call us 24/7+86 15396212224
Welcome to the official website of Kong&Jiang Automation Equipment Co., Ltd!
email:abbdrive88@gmail.com

A-B 1336-FAN-SP2A Cooling Fan 1336 Series Adjustable Frequency AC Drives

The 1336-FAN-SP2A is part of the 1336 series of adjustable frequency AC drives. It is designed for use in 1336 Plus, 1336 Force, 1336 Impact,

1336 Plus Regen and 1336 plus II drives, specifically Frame D drives rated at 60 HP, 75 HP, 100 HP, 125 HP and X150 HP.

The 1336-FAN-SP2A is a cooling fan assembly that is the primary cooling unit for the 1336 adjustable frequency AC drive product line manufactured by Allen-Bradley.

The fan assembly is designed for use with 1336 Plus, 1336 Force, 1336 Impact, 1336 Plus Regen, and 1336 plus II drives.

Especially drives with D-frames or power ratings of 60 HP, 75 HP, 100 HP, 125 HP and X150 HP.

The 1336-FAN-SP2A includes a CHB1 fan capacitor, which is black in colour.

The fan is internally powered from a 115 VAC supply and is rated at 0.67 amps and 75 watts.

The fan is rated at 2550 revolutions per minute (rpm). 1336-FAN-SP2A is designed to prevent the drive from overheating.

The relevant drive parameter that can be used to determine the operation of the fan is the overheat fault parameter 08. This drive fault is defined as an excessive heat sink temperature that exceeds a predetermined value of 90 degrees Celsius or 195 degrees Fahrenheit.

1336-FAN-SP2A is an obsolete component of the 1336 series. It is classified www.abb-drive.com by the manufacturer as a Class 3 discrete component and recommended stock locations include GTS.

When replacing an existing fan with a new component, power to the drive must be disconnected to prevent the risk of electrical shock.

To get the most out of the 1336-FAN-SP2A cooling fan, the drive’s mounting clearance must be met to ensure adequate airflow.

Improper mounting may cause early deterioration of the drive and generate abnormal high temperature warnings that could affect the daily operation of the 1336-FAN-SP2A.

The Allen-Bradley/Rockwell Automation 1336-FAN-SP2A cooling fan is part of the C Series of the Rockwell Automation 1336 Spare Parts family.

The 1336-FAN-SP2A is designed for D-frame drives and is KC certified. The fan is part of the RGU power structure for use with Series A RGUs.

The RGU (Regenerative DC Bus Power Unit) is a regenerative front-end to a shared DC bus drive system that facilitates bi-directional power flow between the shared bus and the AC input (three-phase).

Since regenerative generator sets tend to heat up during operation, the 1336-FAN-SP2A is required to regulate the temperature.

In addition to cooling regenerative units, the 1336-FAN-SP2A is also used to cool controllers that drive induction motors used in industrial field sensitive applications.

Note that only one 1336-FAN-SP2A cooling fan is required per drive or any bus-powered configuration.

The 1336-FAN-SP2A can also be used as a fan replacement for the Frame D 1336 VFD.

The 1336-FAN-SP2A provides cooling for major components that tend to overheat, such as heat sinks and memory modules.

Before installing the 1336-FAN-SP2A on a hard disc, it should first be tested for proper function, including direction of rotation, as this will affect the effectiveness of its cooling system.

For example, reverse rotation draws air from the outside of the drive into the inside of the drive, while reverse rotation draws air from the inside of the drive into the outside space.

Pulling air from the drive may have a drying effect that can exacerbate overheating.

1336-FAN-SP2A Technical Specifications

Manufacturer Rockwell Automation

Brand Allen-Bradley

Manufacturer: Rockwell Automation/Allen-Bradley

Product Type: Cooling Fan

Product Family: 1336 Plus

Part Number: 1336-FAN-SP2A

Compatible Drive Families: 1336 Plus, 1336 Force, 1336 Impact, 1336 Plus Regen and 1336 plus II drives

Compatible Drive Frame: Frame D

Drive Ratings: Rack D: 60 HP; 75 HP; 100 HP; 125 HP; X150 HP

Quantity per Drive: One (1)

Colour: Black

Rated Speed: 2250 rpm

Current rating: 0.67 amps

Spare part class number: Class 3 Discrete

Troubleshooting symbol: FANS

Product Life Cycle: Discontinued

A-B 1756-L73XT Central Processor Module ControlLogix-XT

Description: Allen-Bradley ControlLogix Processor Module with 0.98 MB I/O Memory and 8 MB User Memory

About the 1756-L73XT

This Allen-Bradley Model 1756-L73XT is a ControlLogix-XT controller.

This controller functions similarly to other ControlLogix controllers in that it consists of a control and communication system which is coated

to protect it from harsh and corrosive environments. When used with the FLEX I/O-XT, the Model 1756-L73XT can withstand temperatures from -20 to 70°C. The controller has 8 MB of user memory and is designed to be used in a variety of applications.

The controller has 8 MB of user memory and 0.98 MB of I/O memory. This 1756-L73XT battery is not replaceable.

The controller requires 800 mA of current consumption at 5.1 V AC and 5 mA at 1.2 V AC.

The controller has a power consumption of 2.5W and a thermal dissipation of www.abb-drive.com 8.5 BTU/hr Model 1756-L73XT has a continuous isolation voltage of 30 V.

The USB ports are potentially insulated from the backplane and have been tested to withstand up to 500 V AC for 60 seconds.

The controller’s full USB speed is up to 12 Mbps. The device weighs approximately 0.25 kg and is 1 slot wide. Its module location is based on any slot in the chassis.

For cryogenic applications, use only the 1756-A4K, 1756-A7K, 1756-10K, 1756-A13K, or 1756-A17K chassis.

For general purpose applications, the 1756-A7XT, 1756-A10XT are recommended.This model 1756-L73XT does not have power redundancy, but it does have standard power supplies.

This includes the 1756-PAXT, 1756-PA30XT, 1766-PBXT, and 1756-PB30XT, as well as Category 3 leads on the USB ports.

This Model 1756-L73XT has a non-operating temperature of -40 to 85°C and a maximum ambient air temperature of 70°C at a relative humidity between 5% and 95%.

It has an operating vibration of 10-500 Hz, an operating shock of 30 g, and a non-operating shock of 50 g. The maximum ambient air temperature is 70°C at a relative humidity between 5% and 95%.

A-B 1440-DYN02-01RJ Standard Dynamic Monitoring Module

About the 1440-DYN02-01RJ

The Allen-Bradley 1440-DYN02-01RJ module is a dynamic measurement module.

It is an electronic machine condition monitoring and protection device specifically designed and manufactured to measure vibration, pressure and strain on dynamic inputs.

Some of the inputs that can be connected to the 1440-DYN02-01RJ Dynamic Measurement Module include any Allen-Bradley non-contact eddy current probe input,

standard integrated electronic piezoelectric (IEPE) accelerometer inputs, speed sensor inputs, www.abb-drive.com and DC voltage measurement inputs.

A tachometer input is used to provide speed measurement and order analysis functions. Eddy current probes, unpowered magnetic probes, and other powered and unpowered tachometer sensors are also available for this module.

The Allen-Bradley 1440-DYN02-01RJ Dynamic Measurement Module is primarily used as a machine safety condition monitoring element.

By providing the information needed to protect machines from catastrophic failures, critical vibration parameters can be addressed using existing automation and control systems such as PLCs and displays.

An important thing to note about the Allen-Bradley 1440-DYN02-01RJ Dynamic Measurement Module is that

It must be installed on its network with a dedicated 1440-ACNR ControlNet adapter module and up to ten 1440-DY12-01RJ modules.

No other XM-Series module can be connected to a Dynamic Measurement Module on the same network.

Dynamic Measurement Modules should always be installed in a protected enclosure to keep them away from high temperatures, high humidity and dusty environments.

Wiring to and from the module shall be 12…28 or 14…22 AWG copper conductors without pre-treatment, and 8 AWG rated conductors are required for DIN rail grounding for electromagnetic interference (EMI) protection purposes.

A-B MPL-B540K-SJ22AA High Quality Permanent Magnet Rotary Servo Motor

Description.

This permanent magnet servo motor assembled by AB is a 165 mm frame size servo motor.

In addition, this AC servo does not come with a braking function built into the low inertia motor with a voltage rating of 400V.

In addition, it comes with a single-turn encoder mounted in the servo. In addition, this MPL series premium servo is rated at 4000 revolutions per minute.

This MPL permanent magnet motor comes with a circular bayonet forward connector that is included with this servo motor.

About the MPL-B540K-SJ22AA

The Allen-Bradley/Rockwell Automation MPL-B540K-SJ22AA servo motor is a low inertia AC servo motor.

It is a premium servo motor with positioning accuracy, efficiency and the possibility of dynamic speed changes as standard features.

Users can rely on Allen-Bradley’s extensive expertise in the field of industrial machine www.abb-drive.com speed and position control, which is used in the production of the MPL series of AC servo motors.

The MPL-B540K-SJ22AA servo motor is part of this series and is manufactured using the latest technology and materials to provide high power output in a small enclosure.

The servo motor is rated at 400 volts AC and has a power rating of 5.4 kW.

The motor is rated at 4.000 rpm, while its rotor inertia is rated at 0.00147 kg-m2.The servomotor has a maximum stall torque value of 430 pounds per inch and its continuous stall torque is 172 pounds per inch.

The MPL-B540K-SJ22AA servomotor has a magnetic stack length of 101.6 mm (4 inches) and a 165 mm frame with IEC metric mounting flanges with free-flowing mounting holes (type FF mounting holes).

The key component of the servo motor that interacts with the control section of the overall servo system is the factory-installed, single-turn, high-resolution encoder.

The MPL-B540K-SJ22AA servomotor has a keyed shaft but no shaft seal.

The unit therefore has a protection class of IP 50.The servomotor has been successfully tested in many industrial applications.

This confirms their flexibility and readiness to meet any specific customer requirements and to integrate effectively with a wide range of mechanical, electromechanical and electronic technologies.

MPL-B540K-SJ22AA Technical Description

This premium permanent magnet rotary servomotor (low inertia) includes 400V, 165 mm frame size, 4’ magnetic stack length, 4000 rpm rated speed, single-turn high-resolution encoder feedback, shaft keyed/shaftless seals, round bayonet, face-to-face shafts, no brakes, and IEC metric and standard specified options.

A-B 6180P-12KPXP AC Powered Display Computer

Description.

The 6180P-12KPXP display computer is an AC-powered display computer for the Allen-Bradley/Rockwell Automation VersaView Plus series.

It operates on voltages ranging from 90 to 264 volts AC and frequencies from 47 to 63 Hz. The 6180P-12KPXP display computer has two serial ports and two Ethernet ports.

The 6180P-12KPXP display computer can be controlled from a keyboard and touch screen.

About the 6180P-12KPXP

The Allen-Bradley 6180P-12KPXP VersaView Plus 1200P Integrated Display Industrial Computer is a performance package that has only one keyboard for input.

It has a 12.1-inch screen that is a 256K-colour colour matrix thin-film transistor type with an inherent resolution of 800 x 600 and a display area of 9.7 x 7.3 inches.

The screen response time is 20ms and the viewing www.abb-drive.com angles are 40º vertical and 60º horizontal. This computer’s keyboard input consists of alphanumeric keys and 36 programmable function keys.

This computer is rated for NEMA 1/4/12 type and IP66. and uses panel mounting.

The entire 6180P-12KPXP computer weighs approximately 16 kg or 35.3 lbs. and measures 12.25 x 19.01 x 8.86 inches.

The processor installed on this computer is an Intel Core Duo processor at 2 GHz and the system chipset is an Intel 945GME.

Its memory is expandable as it has 2 dual-channel DDR II DIMM slots that can handle up to 2 GB of memory per slot for a total of 4 GB.

The 6180P-12KPXP computer also features a variety of I/O ports, notably 2 serial ports, 1 DVI port, 2 front USB ports, 4 rear USB ports, and 1 parallel port, as well as 2 RJ45 Ethernet LAN ports capable of handling 10/100/1000 Mbps speeds. To prevent overheating.

This computer is fitted with a processor heatsink, two chassis fans and a PSU fan. It is also equipped with three audio jacks, which are microphone jack, line jack and line out jack.

Installed status indicators include Power/Standby, NumLock, Caps Lock and HDD/ODD/FDD activity.

There are also three disk drives, a slim DVD-RW disc drive, a floppy drive and a 3.5-inch 160 GB hot-swappable hard drive with a SATA interface.

The 6180P-12KPXP has an AC power consumption of 144 VA (1.4 A at 100V rms and 0.6 A at 240V rms).

It has an autoranging input voltage of 90-264 V AC and a line frequency of 47-63 Hz. At peak, it has 1 g of operating vibration and 2 g of non-operating vibration.

Its operating shock is 15 g and non-operating shock is 30 g at 1/2 sine and 11 ms.

The operating relative humidity is 20-85% and the non-operating relative humidity is 5-90%, both of which are non-ductile.

The 6180P-12KPXP has an operating temperature of 0-55°C and a non-operating temperature of -20-60°C.

There are 2 serial ports, 1 parallel port and 2 Ethernet ports for communications and 160 GB of memory capacity. The terminal operates with a 90-264V AC input power supply.

6180P-12KPXP Technical Description

VersaView Plus Series, 12.1’ colour display and keypad input, 90-264V AC input power.

A-B 6155R-14SXPH Standard Model Non-Monitor Computer

Product Description.

The Allen-Bradley 6155R-14SXPH computer is a VersaView series compact non-monitor computer.

It is a standard model non-monitor computer with an 80 GB hard drive and 2 GB RAM.

It has Ethernet ports, USB ports, and a mouse or keyboard port.

The 6155R-14SXPH non-display computer has an operating temperature of 0 to 50 degrees Celsius and a storage temperature of -20 to 60 degrees Celsius.

About the 6155R-14SXPH

The Allen-Bradley 6155R-14SXPH is a VersaView 1400R standard non-display C-Series industrial computer with 14 slots.

Specifically, it has 2 half-length ISA slots and 3 PCI slots, as well as 3 full-length ISA slots, 4 PCI slots, and an internal CompactFlash connector.

The computer’s ports include 1 parallel printer port, 2 serial COM ports, and 1 10/100 RJ45 Ethernet port,

1 USB 1.1 port, 1 PS/2 port for keyboard or mouse, and 1 VGA port.

It also has an audio port, a 3.5-inch floppy drive and a CD drive.

It has a 2 GHz Intel Pentium 4 Celeron processor and 256 MB of RAM.

It is expandable up to 2 GB of memory, consisting of two DIMMS with 1 GB of memory. The computer requires an external monitor.

It has an auto range AC input voltage of 90-264V AC, a line frequency of 47-63 Hz, and power consumption of 150V or 1.5 A @ 100V RMS and 0.63 A @ 240V RMS.

Operating temperatures are 0-50 °C and non-operating temperatures are -20-60 °C. The computer can also withstand 15 g of heat. The computer can also withstand operating shocks of 15 g and non-operating shocks of 30 g (both 11 ms ½ sine waves), and 1 Grms of random operating vibration.

and 1 Grms of random operating vibration. The computer’s www.abb-drive.com enclosure is rated NEMA Type 1.

Technical Description of the 6155R-14SXPH

VersaView Non-Display Series Terminal with 2 GB of RAM and 80 GB of hard drive storage with 120-240V AC or 9-36V DC input power.

A-B 2711-K10G1 PanelView Standard Operator Interface Terminal

Description.

The Allen-Bradley 2711-K10G1 Operator Terminal is designed and manufactured as part of the Allen-Bradley/Rockwell Automation Panelview 1000 Series of standard operator terminals.

It has a 10-inch wide screen and supports only greyscale graphics.The 2711-K10G1 Operator Terminal operates on 85 to 264 volts AC at 47 to 63 Hz.

The communication port is a remote I/O communication port.The 2711-K10G1 operator terminal has 256 KB of memory.

About the 2711-K10G1

Allen-Bradley’s 2711-K10G1 is part of the Panelview 1000 series and is designed for users to efficiently connect to machines.

Operators can easily enter information and commands through the keypad. There is a clear 10.1-inch greyscale display.

greyscale display. Each module is housed in a durable NEMA 12/13 or 4X type enclosure and uses 85-264 VAC input power.

A printer (RS-232) port and remote I/O port are available www.abb-drive.com for adaptive communications.

The Allen-Bradley 2711-K10G1 PanelView Standard Operator Interface Terminals are the high standard in control system automation.

They are hard at work around the world supporting the automotive, food and beverage, pulp and paper, water and wastewater treatment, and petrochemical industries.

Each 2711-K10G1 standard terminal is UL, cUL/CSA, and CE listed.

They are rated for NEMA 4X (IP54. IP65) and approved for Class 1 Division 2 (flat panel only) operation.

These terminals are designed and engineered for scalability, reliability and compatibility to reduce cost of ownership and increase productivity.

This 2711-K10G1 device displays critical alarm data and records and displays important data that triggers an alarm.

When an alarm is recognised, the operator is notified to troubleshoot the problem.

The 2711-K10G1 supports up to five languages in a single application, switching between English, French, Italian, German, and Spanish text in run mode without the need for an ATA memory card.

Specifications are as follows

7.2 lbs (3.3 kg)

11 inches (H) x 17 inches (W) x 5 inches (D)

0 to 55°C (32 to 131°F)

Technical Description of the 2711-K10G1

Remote I/O communications and RS-232 printer port.

A-B 1784-PKTXD Industrial Network Interface PC Host Card

Description of the 1784-PKTXD 2-Channel Communication Card

The 1784-PKTXD 2-channel communication card is manufactured by Allen-Bradley. This communication card uses the PCI bus.

About the 1784-PKTXD

The 1784-PKTXD card is an Allen-Bradley network interface card.

The 1784-PKTXD network interface card is used to connect a PC to a PLC controller via a Data Highway Plus (DH+) or SLC processor and a DH485 network.

This allows the device to enable simpler and more efficient data acquisition processes, which are critical for industrial applications.

The 1784-PKTXD card has an I/O scanner function, which is also available on different cards for use with soft or embedded control engines.

The 1784-PKTXD card includes a generic PCI card as a standard feature. Therefore, the card is compatible with different operating systems.

The 1784-PKTXD card can be used in environments where general programming, configuration, and monitoring functions are required from industrial equipment or computer desktops.

The 1784-PKTXD card is ideally suited for use as a network interface card. Therefore, since it is a general purpose card for interconnecting peripheral components, it must be plugged into a PCI bus slot.

If the operator is using a general purpose card, it must be www.abb-drive.com plugged into a PCI bus slot with either 3.3 volt or 5 volt signals.

The 1784-PKTXD card communicates with nodes on the Data Highway Plus network.

These include the PLC-5. PLC-5/250. and SLC 5/04 processors. This component performs data transfer, management, and local network diagnostics.

The 1784-PKTXD card and the host computer exchange data through a dual-port interface.

The dual-port interface requires up to 4 KB of memory starting at the base memory address that the PCI BIOS addresses for the card when booting the PC.

A-B 1715-OB8DE 1715 Redundant I/O Module 8-Point Digital Output Module

Description of Bulletin 1715-OB8DE

The 1715-OB8DE is a Bulletin 1715 Redundant I/O Module 8-point digital output module.

The module has an 8-point digital output module. It has a maximum power dissipation of 3 watts, supports shielded wire types from 18 to 16 AWG, measures 166 x 42 x 118 mm, and weighs 290 grams.

About the 1715-OB8DE

The 1715-OB8DE, manufactured by Allen-Bradley, is a redundant www.abb-drive.com  I/O module that is part of the Allen-Bradley Redundant I/O Module 1715 series.

The 1795-OB8DE has a maximum power dissipation of 3 watts. 1715-OB8DE operates at temperatures as low as -25 degrees Celsius and as high as 70 degrees Celsius.

The redundant l/O module is described as an 8-point digital output module with 18 to 16 AWG wire gauge. the unit has a shipping weight of approximately 290 grams.

The 1715-OB8DE is a chassis-based application with DIN rail mounting.

The 1715-OB8DE has an open housing type with a display system that serves as a dashboard for health and status indication of the module.

The 1715-OB8DE has an output signal of 18 to 32 volts DC.The shipping dimensions of the 1715-OB8DE are 1 5/8 inches long, 4 5/8 inches wide, and 6 1/2 inches high.

According to the manufacturer, the 1715-OB8DE is equipped with 18-16 AWG solid core stranded copper wire rated at less than 2 watts.

The 1715-OB8DE has a vibration resistance of 2 grams and a shock resistance of 25 grams on DIN rail and in operating condition.

The module has a shock resistance of 30 grams in the non-operating condition and when mounted on a DIN rail, and 50 grams when not mounted.

The 1715-OB8DE is available with current source output type and surge transient immunity

A-B 1398-DDM-075 Servo Drive Unit Ultra 200 Servo Drive

Description

The Allen-Bradley 1398-DDM-075 is an Ultra 200 series digital servo drive: The Allen-Bradley 1398-DDM-075 is an Ultra 200 series digital servo drive. The servo drive is enabled when the AC input voltage requirement is 100-240VAC rms, single-phase or three-phase, and the input frequency is 47-63 Hz. The drive has peak output currents of 50 amps (single phase input) and 75 amps (three phase input) and continuous output currents of 15 amps (single phase input) and 35 amps (three phase input). Peak output power is 14 kilowatts for single phase, 20 kilowatts for three-phase peak output, and 7.5 kilowatts for three-phase continuous output.

About the 1398-DDM-075

The Allen-Bradley 1398-DDM-075 is an Ultra 200 servo drive. This drive was one of Allen-Bradley’s early servo drive products. It is a microprocessor-based servo drive with built-in functions for managing drive current, speed, and position.Ultra 200 servo drives (such as the 1398-DDM-075) are compatible with brushless servo motors.

Specifically, the 1398-DDM-075 has an AC input voltage requirement of 100-240VAC rms, single-phase or three-phase, and an input frequency of 47-63 Hz. It also has an auxiliary input that is isolated from the supply voltage of the main AC input circuit. The auxiliary AC input is rated at 100-240 VAC, single phase, 47-63 Hz, and has an input current of 1.0 amp for 100 VAC and 0.5 amp for 240 VAC.

The drive has a peak output current of 50 amps for single-phase input and 75 amps for three-phase input, and a continuous output current of 15 amps for single-phase operation and 35 amps for three-phase operation. Peak output power is 14 kilowatts for single www.abb-drive.com phase, 20 kilowatts for three-phase peak output, and 7.5 kilowatts for three-phase continuous output.

The drive has a total line voltage of 141-339 VDC, bus capacitance energy absorption of 152 Joules, and bus capacitance of 4290 µF. power dissipation is 300 watts.

The 1398-DDM-075 has five (5) user-configurable 24 Volt, current-absorbing, opto-isolated, active-high inputs; one (1) fixed assignment control (ENABLE), current-absorbing, opto-isolated, active-high input; four (4) assignable 24 Volt, current-absorbing, opto-isolated, active-high outputs; and two (2) dedicated (Brake and Drive Ready), normally open relay outputs. relay outputs. The embedded analogue input/output channels include two dedicated 10-bit 0 – 10 volt analogue inputs (+I LIMIT and -I LIMIT) and two selectable ±10 volt analogue outputs, one 12-bit and one 8-bit (ANALOG1 and ANALOG2).

The 1398-DDM-075 module also has analogue outputs with 8-bit and 12-bit resolution. The analogue input voltage range is 0-10 volts. The analogue inputs have 10-bit resolution. 1398-DDM-075 has an integrated power supply and a shunt regulator, which uses a microcontroller to manage the machine’s position, speed, and current. 1398-DDM-075 servo drives are powerful and require minimal maintenance. When maintenance is required, the standard procedure is to check that cable insulation and connections are intact. Recommended humidity limits are between 5% and 95%, the same as other ULTRA 200 drives. 1398-DDM-075 weighs 21.32 lbs. Peak output currents are 50A for single-phase power supplies and 75A for three-phase power supplies. the input frequency is 47-63 Hz. when operating the 1398-DDM-075 ULTRA 200 Servo Drive from a single-phase power supply, the current limit must be set correctly to avoid damage to the module. the 1398-DDM-075 can be operated from a single-phase power supply. the 1398-DDM-075 can be operated from a single-phase power supply.

Search for products

Back to Top
Product has been added to your cart