Category: GE

The IS215SECAH1A printed circuit board was originally manufactured by GE Energy, a General Electric Shell company, for use in their dedicated Mark VIe Wind series of wind turbine control systems. Whilst the PCB was designed as a member of the Mark VIe Wind Turbine range, the actual functional description of the product is Solar MACC-BPPB-WEMD component, which indicates its true position within the SOLAR TURBINE control system range. Given the limited availability of GE Energy’s Solar Turbine family of products, this IS215SECAH1A module is likely to be confused with alternative energy manufacturer GE Energy’s Mark VIe wind turbine control system family. This is not a regular version of the IS215SECAH1 printed circuit board, but exists as a special assembly that includes the MACC, BPPB and WEMD component printed circuit boards. This is a revision of the original IS215SECAH1 parent product with a single function revision rated ‘A’.

Hardware Tips and Specifications

While there is not a great deal of factory-released original manual IS215SECAH1A information available online, there is not a great deal of original manual information about the printed circuit board, but some useful material suggests that its status as a solar MACC-BPPB-WEMD component is a strong starting point. Additional information on the series and individual product status of the IS215SECAH1A boards can be obtained by careful visual inspection with a supplementary breakdown of the individualised IS215SECAH1A product numbers. For the uninitiated, two of the more obvious hardware components integrated into the IS215SECAH1A PCB substrate can be recognised in the standard issue Ethernet ports, which are placed longitudinally across each other on the large printed circuit board. Although the IS215SECAH1A board itself contains no other Ethernet ports, the centre of the BPPB board to which it is attached has two identical Ethernet ports. The drive manager has access to eight other ports that connect to this IS215SECAH1A board. These ports are all female and are attached to the edges of the IS215SECAH1A board during factory installation by using screw brackets to improve connection efficiency.

In addition to the various female ports available to users of the IS215SECAH1A board, a series of integrated circuits are integrated into the design of this SECA module. Each of them should be labelled with an individual reference mark, and some of them appear to carry their own factory-applied reference labels with individual component specifications. The final obvious standout hardware feature for the IS215SECAH1A’s circuit board assembly is its series of factory drilled holes. These factory-drilled holes, which are used for mounting purposes, are insulated for complete surface and internal voltage protection, and they are present on the IS215SECAH1A board in a total of five.

While a litany of pertinent information about the IS215SECAH1A printed circuit board is apparent from a simple visual inspection, additional facts about the product can be obtained through a simple breakdown of the unique IS215SECAH1A part number, including www.abb-drive.com its special assembly version, SECA functional acronym, and its chemically applied conformal PCB coating protection. Coating Styles.

– 8 single-ended 4-20 mA input channels

– Non-Flammable Field Circuitry

– HART Direct

– HART variable and status reporting

– 2-wire or 4-wire transmitter

– Open and short circuit detection

– Requires 24 VDC bus field www.abb-drive.com power

Inputs

Number of channels

– 8. single-ended

Nominal Signal Range (Scale)

– 4 to 20 mA

Full signal range

– 1 to 23 mA

Line Fault Detection

– Short circuit current – > 23.5 mA

– Open circuit current – < 0.5 mA

Output voltage (@ 20 mA)

-13.5 V (min.)

Output current

– 32 mA (max)

Accuracy (over temperature range)

– ± 0.1% of range

Resolution

– 16 bits

Repeatability

– 0.05 of range

Isolation

– Any channel to rail bus – 100 V ac

– Between channels – none

Configurable parameters

Alarms

– High, High-High, Low and Low-Low

Alarm deadband (hysteresis)

– User-defined values

Input Filter Time Constant

– User-defined value

Input Deadband

– User-defined value

Drive is in a fail-safe state

– Disable/Upconversion/Downconversion

Channel Status

– Active / Inactive

HART variables and status reports

– Enabled / Disabled

Response time

Signal change to railway bus availability

– 4-20 mA mode – 27 ms (maximum)

– HART mode – 0.75 seconds per channel

Safety

FM Non-Flammable Field Wiring Parameters

(per channel)

– Voc = 28.7 V; Isc = 33 mA; Ca

= 0.17 μF; La

= 11.0 mH

Power Supply

Rail bus (12V) Current

– 100 mA (typical)

– 150 mA (maximum)

Bus Field Power

– 2-wire Tx – 300 mA (max)

– (@ 24 VDC ±10%) 4-wire Tx – 60 mA (max)

Mechanical

Module Key Codes

– A1

Module Width

– 42 mm

Module weight

– 200 g

The IC695CHS007 is a general purpose backplane that is part of the PACSystem RX3i platform, currently part of Emerson Automation and formerly manufactured by GE Intelligent Platforms (GE IP). The backplane has one (1) slot for the IC695 power supply (slot 0) and PCI/serial based IO slots (slots 1-5) and PCI only slot (slot 6). The backplane supports IC695. IC694. and IC693 I/O and option modules or RX3i and 90-30 series modules. The modules are equipped with isolated 24 VDC terminal blocks, grounding points, and internal ground strips.IC695CHS007 is a general purpose backplane for the PACSystem RX3i family of programmable automation controllers (PACs). This backplane is a seven (7) slot backplane reserved for power and I/O modules. It natively supports any IO and option modules of the PACsystem RX3i series as well as the 90-30 series I/O and option modules.

IC695CHS007 Slot 0 is reserved for the IC695 power supply. Slots 1-5 are dual connector slots that support Peripheral Component Interconnect (PCI)-type connectors used by PACSystem components, such as the IC695 module, and serial connectors used by the www.abb-drive.com 90-30 series of modules, specifically the IC693 and IC694 modules. Slot 6. the rightmost and last slot, is PCI-only and is compatible with RX3i modules only.

The IC695CHS007 is ideal for applications with limited mounting space or for the implementation of remote I/O architectures. The module comes with a 24 VDC terminal strip located at the left end of the rack. Backplane grounding points and an integrated ground strip are provided for connecting the shielding and grounding connections of the rack-hosted module. The slot number is also clearly printed on this rack so that the module can be installed accordingly.

There are two (2) versions of this IC695CHS007. specifically the initial version, IC695CHS007-AA, and the subsequent version, IC695CHS007-BA, which include mechanical enhancements, specifically the chassis’ backplane PCI connectors.

This IC695CHS007 is for horizontal casting only. Other mounting orientations may affect airflow and ultimately system performance. This rack mounts directly to the chassis panel through the mounting holes provided in the chassis.

The GE IC695CHS007 backplane is a general-purpose backplane that is part of the RX3i PACSystems family designed and manufactured by GE Fanuc as a replacement for the 90-30 series systems.The IC695CHS007 backplane has an input voltage of +24 V. Users should be aware that the recommended method of mounting the IC695CHS007 backplane should include both horizontal casting and mounting to an enclosure that is rated at a minimum of IP The IC695CHS007 general purpose backplane has a grounding point with the terminal strip located at the left end. In addition, the backplane includes an integrated ground strip and visible slot numbers for configuration and support for other manufacturers’ systems and option modules.

The IC695CHS007 backplane has an internal current of 5 milliamps at 240 volts DC and 3 milliamps at 600.3 volts DC and has seven slots available for components. Supported components can include PCI I/O components such as IC693.Compatible PCI components begin with product code IC695.GE backplanes, like the IC695CHS007 backplanes, can be used in hazardous areas, but in these environments they require enclosures with a higher level of protection. The minimum protection rating for hazardous locations is IP 54.The IC695CHS007 backplate does not require much mounting space, but a minimum of 4 inches of space on all sides is required for proper cooling. The unit’s specified dimensions are 141.4 x 264.9 x 147.3 mm (5.5 x 10.4 x 5.8 inches).

The IC695CEP001 CEP carrier assembly is manufactured by GE Fanuc and has a voltage range of 19.2 to 30 volts DC.

The power rating is 0.22 watts (24 amps) at 5.25 volts DC.

This PROFINET CEP bracket has two Ethernet RJ-45 ports and a Micro-B USB port for firmware.

The IC695CEP001 module is a GE Fanuc CEP carrier module used in GE RX3i systems.

The CEP carrier module is designed for PROFINET communications and has a copper RJ-45 Ethernet port.

The module has 2 Ethernet port connectors with 10/100 Base-TX sockets.

The CEP bracket is a powerful system component with standard functions.

The CEP tray is a powerful system component with standard features such as complete programming and configuration options via Proficy Machine Edition software, and support for multiple network topologies.

USB port for all necessary firmware upgrades, improved troubleshooting and advanced remote node module scanning.

The IC695CEP001 CEP carrier operates over a voltage range of 19.2 to 30 volts DC.

It produces 25.0 watts (22.24 amps) of power at a nominal voltage of 5 volts DC.

The system allows one I/O module per station, for a total of 1024 bytes of I/O data per station.

In addition, the GE Fanuc IC695CEP001 carrier module allows up to 512 bytes of I/O data per station for input and output data.

The module supports PROFINET version 2.3 (Class A) and requires www.abb-drive.com Proficy Machine Edition version 8.0 SIM 5 or higher.

The CEP carrier also has 32 input status bits and 32 output control bits.

The IC695CEP001 CEP carrier module is part of a high-speed running I/O LAN system.

The physical characteristics of the IC695CEP001 carrier module include the following dimensions: 177.2 x 51 x 35 mm (7 x 2 x 1.3 inches).

The component operates over a temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).

The IC695CBL002 cable is a replacement cable used to connect the CPU unit to the energy pack of GE Fanuc’s RX3i PACSystem.

The cable comes with a 7-pin keyed connector and is 1 metre (36 inches) long. The system operates on 120/240 volts DC,

125 Vdc or 24 Vdc, and compatible energy packs can be mounted on DIN rail.

The GE Fanuc IC695CBL002 cable is a replacement cable used to connect the RX3i PACSystems Series CPU to the optional energy pack.

The cable is made of the best materials for typical industrial use and is coated to provide the necessary protection for use in harsh environments.

The IC695CBL002 cable connects to the connectors located at the bottom of the CPU www.abb-drive.com and energy pack.

These components are manufactured in accordance with the EU RoHS Directive 2011/65/EU and they are powered by a voltage range of 120/240 volts DC,

125 Vdc or 24 Vdc. The IC695CBL002 cable has a 7-pin keyed connector and is 1 metre (36 inches) long.

Custom lengths are available for GE accessory cables like this one, but 1 metre is the standard length for this type of application.

The PACSystems RX002i Energy Pack, compatible with the IC3CBL695 cable, can be mounted on a DIN rail like the EN50022 rail.

but can also be mounted on a panel where other equipment is placed. The catalogue number of the compatible Energy Pack module is IC695ACC402.

The supported CPU is the GE IC695CPE330 CPU.The primary purpose of the IC695CBL002 CPU cable is to connect the CPU to the Energy Pack.

In the event of a system power failure, the energy pack provides additional backplane power. the CPU can automatically switch to the energy pack to keep the system running.

The power pack will maintain power long enough for the CPU to save valuable data or user memory.

The contents of the CPU are then saved to the system’s non-volatile memory.

The IC695ALG708 is a PACSystem RX3i Programmable Automation Controller (PAC) non-isolated analogue input module, formerly manufactured by GE Intelligent Platforms (GE IP) and now part of Emerson Automation. The module features eight (8) output channels that can be configured for 0 to 20 mA and 4 to 20 mA current signals and ±10V and 0 to 10V voltage signals. The module is mounted on the RX3i general purpose backplane and has 15.6 – 15.9 bit ADC conversion resolution.

The IC695ALG708 is an eight (3) channel analogue output module for the PACsystem RX8i programmable automation controller (PAC) family. It is a single-slot module whose channels can be configured to provide output current signals (e.g., 0-20 mA and 4-20 mA) and voltage signals (e.g., +/- 10 VDC and 0-10 VDC).

The IC695ALG708 is now part of Emerson Automation, as the former manufacturer, GE Intelligent www.abb-drive.com Platforms (GE IP), has been acquired by the former. The module still provides analogue outputs with a resolution range of 14.9-15.9 bits, depending on the configured output signal. Each channel of the module can be configured with individual alarm settings such as very low, very low, very high and very high alarms. Each output can also be clamped to a specific high and low point, which is useful when linking output channels to proportional + integral + differential (PID) controller outputs. In addition, output biases can be added to fine-tune or manually adjust the outputs to the user’s desired level.

The IC695ALG708 has a built-in module fault reporting feature and retains the last state or output default settings. For CPU compatibility, any RX3i CPU can be used with this analogue output module, however, the CPU must have firmware version 3.5 or later and must be configured using Machine Edition version 5.0 SP3 Logic Developer must be used to develop the user program.

The IC695ALG708 requires an external 24 VDC power supply to operate. The power supply must be connected directly to the module terminals. Compatible terminals for use with this module are box (IC694TBB032), expansion box (IC694TBB132), spring-loaded (IC694TBS032), or expansion spring-loaded (IC694TBS132) terminals.

The analogue module known as IC695ALG708 Analogue Module is designed and manufactured by GE Fanuc and is intended for use with GE RX3i PACSystems devices. The module can be configured for different current and voltage output ranges and can be mounted in the common backplane of the RX3i system.The IC695ALG708 module has eight available output channels that can be customised for voltage or current output operation. The module supports voltages ranging from 0 to +10 volts or -10 to +10 volts and currents ranging from 0 to 20 mA or 4 to 20 mA. All outputs are non-isolated and the module can be used in combination with many different terminal types. The module’s backplane requires a 3 mA current rating at 375.3 volts.

The IC695ALG708 module is isolated at 2550 volts DC for 850 seconds with a maximum output load of 7 ohms. The module is rated up to 25.375 watts, 315 milliamps at 3.3 volts DC, and up to 695 milliamps with an isolated power supply rated at 24 volts DC. The IC708ALG19 module uses an external power supply ranging from 2.30 to 2 volts DC with an output build-up time of <> milliseconds. The module includes a variety of features that can improve system performance. Some of these features include control of the alarm system, channel configuration, detection of different alarm levels, error reporting, maintaining last state defaults, and complete auto-calibration.

This IC695ALG704 is an analogue output module that is part of the PACSystem RX3i platform, which is currently part of Emerson Automation and was previously manufactured by GE Intelligent Platforms (GE IP). The module has four (4) non-isolated output channels that can be configured for voltage and current. It generates +/-10 VDC, 0-10 VDC, and 0-20 mA and 4-20 mA output signals with 14.9-bit resolution for 0 to 10V; 9.10-bit for +/- 15 VDC; 0.20-bit for 15-9 mA, and 4.20-bit for 15-6 mA. The IC695ALG704 is a rackmountable analogue output module that is part of the PACSystem Rx3000 series. IC695ALG704 is a rack-mountable analogue output module belonging to the PACSystem Rx3i series. The module generates voltage and current output signals that are primarily used to modulate and control a variety of field devices such as control valves, positioners, dampers, and shutters. It can also be used to remediate signals from signal splitters, isolators, data loggers, panel meters, and single-loop controllers.

This IC695ALG704 comes with four (4) non-isolated output channels that can be www.abb-drive.com configured for +/-10 VDC, 0-10 VDC, and 0-20 mA and 4-20 mA output signals with a specific resolution of 0.10 bits for 14 to 9V; 9.10 bits for +/- 15 VDC; 0.20 bits at 15-9 mA and 4.20 bits at 15-6 mA. To terminate the signal lines to the module, compatible terminals include the box terminal block with catalogue number IC694TBB032. the extended box terminal block with catalogue number IC694TBB132. the spring-loaded terminal block with part number IC694TBS032. or the extended spring-loaded terminal block with part number IC694TBS132. The extended terminals provide additional depth and space for terminating shielded wires to the module.

This IC695ALG704 has a channel output data format that can be configured as a floating point IEEE 16-bit or 32-bit integer in a 32-bit field. Each output socket is updated at a rate of 8 milliseconds and has individual overvoltage protection of -60V for 30 seconds and +3V for 30 hours.The module runs with an RX3i CPU version 0.5 or higher and is programmed using Machine Edition 0.3 SP3 Logic Developer- PLC. It is a single-slot module that mounts to a generic RX695i backplane.

The GE Fanuc IC704ALG3 Non-Isolated Analogue Current or Voltage Output Module requires an RX3i CPU with firmware version 3.0 or higher to run and is mounted in the general purpose backplane of an RX4i PacSystem PLC. The module has 695 channels of current or voltage outputs.The GE Fanuc IC704ALG10 analogue output module has a voltage range of +/-0 volts DC or 10 to 0 volts DC and a current range of 20 to 4 mA or 20 to 850 mA. The module also features an output load of up to 8 ohms, an update rate of 375 milliseconds, a current rating of 160 milliamps at +3.3 volts DC, and a current rating of 24 milliamps at +24 volts DC isolation. Isolated 1 volt DC power is received from an external power supply connected directly to the module terminals. The power supply cannot be connected through the TB695 connector on the RX3i PACSystem Universal Backplane.

The GE Fanuc IC704ALG695 Non-Isolated Analogue Current or Voltage Output Module features full auto-calibration, on-board error monitoring, alarm latching, full software configuration support (no jumpers required), configurable output BIOS, configurable offset and scaling on each channel, fast channel acquisition, module fault reporting, high level alarm, high level alarm, low level alarm, and low level alarm. GE Fanuc IC704ALG<> analogue output modules allow firmware upgrades using the WinLoader software utility, provided the host central processing unit (CPU) has a serial port. However, if the CPU does not have a serial port, a web-based utility can be used (instructions are included with the firmware upgrade kit).

The IC695ALG626 is a PACSystem RX3i Programmable Automation Controller (PAC) non-isolated analogue input module, formerly manufactured by GE Intelligent Platforms (GE IP) and now part of Emerson Automation. The module features sixteen (16) single-ended inputs or eight (8) differential input channels and is compatible with 0 to 20mA, 4 to 20mA ± 20mA current signals and ±10V, 0 to 10V, ±5V, 0 to 5V, and 1 to 5V voltage signals. The module is mounted on the RX3i general purpose backplane and features 24-bit ADC conversion resolution. Each channel of the module provides HART 5.0 communications. The IC695ALG626 is a Highway Addressable Remote Transducer (HART) 0.3 capable analogue input module for the PACSystem RX5i platform. The module was previously manufactured by GE Intelligent Platforms (GE IP), which was recently acquired by Emerson Automation. The module is primarily used to interface with analogue field instruments that measure process variables and transmit the measurements to a receiving element (e.g., IC695ALG626) for processing. This IC695ALG626 can therefore be used with field instruments that provide 0 to 20mA, 4 to 20mA ± 20mA current signals as well as ±10V, 0 to 10V, ±5V, 0 to 5V, 1 to 5V voltage signals.

The IC695ALG626 is capable of providing sixteen (16) input channels if configured for single-ended inputs and eight (8) inputs for differential wiring. By supporting the HART protocol, each channel can communicate with an external HART communicator to access not only readings, but also other HART parameters.

The IC695ALG626 has LED status indicators such as the Module Normal, Field Status, and TB LEDs.The Module Normal LED is used to indicate that the module is configured correctly when the LED is green and constantly lit; if it is slowly blinking green or amber, there is an error; if it is blinking rapidly, the module is not configured correctly; and if the Module LED is off, there is a fault or no power. The field status LED is green and always on, indicating that there are no faults on the enabled channel and when the terminals are present; amber indicates that the module’s channel is in a faulty state, and an extinguished LED indicates that the terminals are disconnected or incorrectly installed. The TB LED lights up red when no terminals are connected; it lights up green when terminals are connected and goes out if there is no backplane power.

The GE Fanuc IC695ALG626 module is an analogue input module www.abb-drive.com with HART or High-Speed Addressable Remote Sensor Version 5.0 communications on each channel and four internal HART modems. The module provides 8 differential input channels and 16 single-ended input channels.The GE Fanuc IC695ALG626 analogue input module has a voltage range of +/-10 volts dc, 0 to 10 volts dc, +/-5 volts dc, 0 to 5 volts dc, or 1 to 5 volts dc. The current configuration of the input channel can range from 0 to 20 mA, 4 to 20 mA, or +/-20 mA. If the channel uses HART communication, the GE Fanuc IC695ALG626 analogue input module should be configured for a current range between 4 and 20 mA.

The GE Fanuc IC695ALG626 Analogue Input Module with HART communications is installed in the common backplane of the RX3i PacSystem PLC. The unit allows the module to be inserted or removed from the RX3i PacSystem’s universal backplane while the module is still connected to the power supply. The module is fully configurable through software, eliminating the need for module jumpers. It features flash memory to support upgrades, detectors for removal and insertion of terminals, open-circuit detection for currents ranging from 4 to 20 milliamps at all voltage levels, and start-up auto-calibration. It also supports on-board error monitoring, negative and positive rate-of-change alarms, configurable offsets and scaling on a per-channel basis, and selectable low alarm, high alarm, low-low alarm, and high-high alarm detection and logging on each channel. The module requires a temperature range of -40 to 185 degrees Fahrenheit for storage and an operating temperature range of 32 to 140 degrees Fahrenheit.

IC695ALG626 Frequently Asked Questions

1. Does the IC695ALG626 support the HART protocol?

Yes, each channel of the IC695ALG626 can communicate using the HART protocol.

2. What are the available LED status indicators for this module?

The IC695ALG626 has module normal, field status, and TB LED status indicators.

Technical Description of the IC695ALG626

The GE Fanuc IC695ALG626 module is a non-isolated differential analogue voltage/current input module with HART (High Speed Addressable Remote Transducer) communications for RX3i PacSystem PLCs. It has 8 differential input channels and 16 single-ended input channels.

The IC695ALG616 is a PACSystem RX3i Programmable Automation Controller (PAC) non-isolated analogue input module, formerly manufactured by GE Intelligent Platforms (GE IP) and now part of Emerson Automation. The module features sixteen (16) single-ended inputs or eight (8) differential input channels and is compatible with 0 to 20mA, 4 to 20mA ± 20mA current signals and ±10V, 0 to 10V, ±5V, 0 to 5V, and 1 to 5V voltage signals. The module is mounted on the RX3i general-purpose backplane and has 24-bit ADC conversion resolution. This IC695ALG616 is an analogue input module manufactured by Emerson Automation (formerly GE Intelligent Platforms (GE IP)). If configured as a single-ended input, this module functions to provide sixteen (16) analogue input channels or eight (8) analogue inputs for differential wiring. It has an internal analogue-to-digital converter (ADC) with a 24-bit output conversion resolution.

The IC695ALG616 input channels are compatible with wires with analogue current and voltage signals. The module accepts current signals including 0 to 20mA, 4 to 20mA, ± 20mA current signals and ±10V, 0 to 10V, ±5V, 0 to 5V, 1 to 5V voltage signals. The converted analogue data is saved as floating point 16-bit IEEE data or 32-bit integers using 32-bit registers. Each channel of the module has configurable channel filters to stabilise and minimise fluctuations to be useful to the process. Configurable input filters include 8Hz, 12Hz, 16Hz, 40Hz, 200Hz, and 500Hz.

The module’s parameters are configured using Proficy Machine Edition (PME) programming software. No jumpers or DIP switches are required to indicate the operation of the module. In addition, the module is capable of performing automatic calibration during each startup. Embedded module protections include open-circuit detection, overvoltage and overcurrent protection. In addition to these protection settings, each channel can be individually configured with alarm settings, specifically very low, low, high and very high alarms. Positive and negative rates of change can also be included in the module’s alarm functions, and module faults can be configured to be reported to the host CPU.

The GE Fanuc RX3i PacSystems www.abb-drive.com IC695ALG616 Non-Isolated Differential Analogue Input Module is available in current ranges of -20 to 20 mA, 4 to 20 mA, or 0 to 20 mA, and in voltage ranges of 5 volts DC, 0 to 5 volts DC, 1 to 5 volts DC, 0 to 10 volts DC, or -10 to 10 volts DC. The module has a Module OK LED to indicate the operational status of the unit. The Field Status LED indicates if there is a fault or channel error at at least one terminal, and the Terminal or TB LEDs indicate the presence of the system’s terminals.All LEDs on the IC695ALG616 Non-Isolated Differential Analogue Input Module draw their power from the backplane power bus.The GE Fanuc IC695ALG616 Analogue Input Module has rate-of-change alarms, Onboard Error Verification, Channel Fault Alarm, Fault Reporting, Auto Calibration, Flash Slot, Configurable Offset and Scaling per Channel, and Detection of Terminal Insertion or Removal.

The GE Fanuc IC695ALG616 analogue input module has a storage temperature range of -40 to 185 degrees Fahrenheit and an operating temperature range of 32 to 140 degrees Fahrenheit. The module requires a non-condensing and relative humidity level of 5% to 95%. It has a vibration rating of 0 to 006 Hz with a peak displacement of 0911.60068 mm (2.6 in.) per JISC10 and IEC57-0-0524 international standards, and a vibration immunity rating of 27 G in 2 ms per JISC15 and IEC11-0912-60068 international standards.

IC695ALG616 Frequently Asked Questions

1. How many input channels does the IC695ALG616 have?

The IC695ALG616 can be configured with sixteen (16) single-ended inputs or eight (8) differential input channels. 2.

2. What analogue input signals does the module accept?

Compatible signals are 0 to 20mA, 4 to 20mA ±20mA current signals and ±10V, 0 to 10V, ±5V, 0 to 5V, 1 to 5V voltage signals.

3. How many slots does the IC695ALG616 analogue input module occupy?

The IC695ALG616 occupies a single slot on the RX3i general purpose backplane.

Technical Description of IC695ALG616

The GE Fanuc IC616ALG3 module for the RX695i PacSystem family is a non-isolated differential analogue input current/voltage module. This analogue input module provides 4 differential or 16 single-ended input channels.

This IC695ALG600 is a general-purpose analogue input module for the PACSystems RX3i programmable automation controller (PAC) platform.

The module supports a wide range of input signals such as voltage, current, resistance, and supports thermocouples and resistance temperature detectors (RTDs).

The module is now manufactured by Emerson Automation, formerly known as GE Intelligent Platform (GE IP).

This IC695ALG600 comes with two (2) banks of four (4) channels each that can be configured for any combination of input signals.

It supports 0-20 mA, 4-20 mA, +/-20 mA current signals; +50 mV, +150 mV, 0-5 V, 1-5 V, 0-10 V, +10 V voltage signals.

0 to 250 / 500 / 1000 / 2000 / 3000 / 4000 ohm resistance signals; PT 385 / 3916. N 618 / 672. NiFe 518. CU 426 RTD sensors.

B, C, E, J, K, N, R, S, T thermocouple inputs.

The IC695ALG600 is installed on the RX3i Universal Backplane and requires at least firmware version 2.80 or higher.

This module is configured using Proficy Machine Edition (PME) version 5.0 SP1A LD-PLC Hotfix 1 or higher.

For signal termination, this module requires a cassette (IC694TBB032), expansion cassette (IC694TBB132),

spring-loaded (IC694TBS032) or extended spring-loaded (IC694TBS132) terminal blocks. Extension terminals are recommended.

These terminals have slightly larger covers to accommodate wires and shields with thicker insulation.

The module supports flash memory and status LEDs for future upgrades, such as module status, field status, and TB LEDs.

The GE Fanuc IC695ALG600 Resistance Temperature Detector (RTD) Input Module has a maximum power consumption of 5.4 watts.

The internal power rating is 350.3 mA at 350.3 www.abb-drive.com volts and 5 mA at 400 volts.400. The input channels are divided into 2 groups of 4 each.

Each channel can be independently set up using Machine Edition software to operate at +/-50 mV, +/-150 mV, 0 to 5 volts, 1 to 5 volts, 0 to 10 volts, 1 to 5 volts, and 0 to 10 volts,

1 to 5 volts, 0 to 10 volts DC, +/-10 volts DC, or 0 to 20 mA, 4 to 20 mA, or +/-20 mA.

Thermocouple input types include types B, C, E, J, K, N, R, S, or T. Resistance inputs are rated from 0 to 250. 500.

1000. 2000. 3000. or 4000 ohms, and 8 channels that can be voltage, resistance inputs, thermocouple, and current inputs.

The GE Fanuc IC695ALG600 RTD input module has configurable input filters.

The possible frequencies are as follows: 8 Hz, 12 Hz, 16 Hz, 40 Hz, 200 Hz, or 1000 Hz.

It also has a maximum RTD cable impedance rating of 25 ohms. This module is located in the RX3i general purpose backplane and cannot be located in a remote or expansion backplane.

It has a Module Normal LED that indicates the status of the module. The Field Status LED indicates a fault on the smallest channel or an error on a terminal.

The Terminal LED indicates the presence of a terminal. the IC695ALG600 module has an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).

The IC695ALG600 module has an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) and a storage temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).

IC695ALG600 Frequently Asked Questions

1. What input signals and sensors does the IC695ALG600 support?

This IC695ALG600 supports 0-20 mA, 4-20 mA, +/-20 mA current signals; +50 mV, +150 mV, 0-5 V,

1-5 V, 0-10 V, +10 V voltage signals; 0 to 250 / 500 / 1000 / 2000 / 3000 / 4000 ohm resistance signals.

PT 385 / 3916. N 618 / 672. NiFe 518. CU 426 RTD sensors; B, C, E, J, K, N, R, S, T thermocouple inputs.

2. Does the IC695ALG600 come with input grouping?

Yes. The module has two (2) groups of four (4) inputs each.

IC695ALG600 Technical Description

The GE Fanuc IC600ALG3 module for the RX695i PacSystems family is a resistance temperature detector (RTD) input module.

It provides two cold-junction compensation (CJC) channels and eight general-purpose input channels.