The CSI 6500 Equipment Condition Monitoring System is fully compliant with API 670 and is designed to protect and monitor critical rotating machinery.

Special features of the system include the ability to integrate data from protection functions into DeltaV and Ovation process automation systems in three simple steps;

Transient analysis with real-time display, logging, pause and playback; and superior PeakVue processing for early detection of bearing and gear damage.

Subrack Configuration:

– The 19″ subrack is used only for the 6 U version of the protection function and the standard 3 U version of the protection function.

– The 19″ subrack is used only for the forecasting function and has a mounting height of 6 U with front or rear sensor connection terminals.

A compact version with a mounting width of 7.5″ is also available.

– Only the 19″/6 U subrack is available for combined protection and forecasting functions.

n The machine monitoring function is fully compliant with API 670.

n Standard 19″/6 U subrack for cabinet mounting

n System design ensures that no more than two channels are affected in the www.abb-drive.com event of a card failure; cards can be replaced during operation

n Internal clock synchronized to the system master clock

n Redundant ModBus connections, TCP or serial connections for integrating the Protection Monitor into third-party control systems.

Additional ModBus outputs for forecast parameters

n 16 or 32 trip relay output slots

n Dual channel speed/keypad

n 12 slots for 3 U dual-channel vibration or position monitoring modules with a total of 24 inputs

n 4-20 mA outputs and buffered signal outputs on front and rear panels

n Configurable external alarm output disable and limit increase for each channel

n External power supply unit, no slots required

In every factory, 5% of rotating machines cause production to stop.

Although your critical machines are fitted with vibration shutdown protection systems to prevent catastrophic failure, is your plant really protected?

What about the shocking repair costs, missed production targets and unfulfilled customer promises associated with tripped or missed trips?

As much as 50% of mechanical failures that lead to downtime are caused by the process, while 90% are predictable or even controllable.

Real-time machine health feedback integrated with process automation allows you to run your plant with confidence.

The CSI 6500 Machinery Health Monitor is designed for process automation and protection system upgrade projects.

Housed in a single chassis, the CSI 6500 combines proven predictive and protective features to provide a complete online machinery monitoring solution.

Emerson is a global leader in integrated process automation technologies and predictive technologies for plant-wide fixed and rotating asset management.

Fully compliant with API 670 standards, the CSI 6500 integrates protection, prediction, real-time performance monitoring, and process automation.

The CSI 6500 is part of Emerson’s PlantWeb digital architecture, which provides enterprise-wide information for real-time decision making.

Related Product Recommendations:

CP6415 Control Panel Touch Screen Controller

CP650D1 Touch Screen Control Panel Human Machine Interface

CP651 touch screen control panel man-machine interface

D20 MIC 10BASE-T Cost Effective Processor Module

IC690RFH008 8 Multimode Reflective Memory Hub and Accessory Kit

IC697CPX928-FE Series 90-70 Programmable Logic Controller (PLC) CPUs

COMMANDER310 Wall Mount/Pipeline General Purpose Process Controller

D674A904U01 Analog Module Industrial System Controller