Intel® Pentium® III PGA370 socket-based Single Board Computers (SBCs) supporting Windows® 98 Second Edition,

Windows NT®/Windows® 2000. Windows CE, Linux, VxWorks, QNX, Solaris and LynxOS operating systems.

-Special features for embedded applications

-Up to 192 Mbyte IDE CompactFlash (optional)

Three programmable 16-bit timers

32 Kbyte non-volatile SRAM

-Supports remote Ethernet boot

-Software selectable watchdog timer with reset.

-Supports VMEbus P2 connection to hard disk/floppy drive.

-PMC Expansion Site with VMEbus P2 Inputs/Outputs

-VME64 mode support: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32

-VMEbus interrupt handlers, interrupters, and system controllers

Includes byte-swapping hardware for little-end and big-end data.

-Enhanced bus error handling

-Passive heat sink design (no moving parts)

-Standard features include

-PGA370 socket processor

Up to 512 Mbyte SDRAM using a 144-pin SODIMM

-AGP SVGA controller with 4 Mbyte SDRAM

Two on-board Fast Ethernet controllers supporting 10BaseT and 100BaseTX interfaces

-Front panel Universal Serial Bus (USB) connection

-Onboard Ultra-DMA-33 hard disk drive and floppy drive controller with VMEbus P2 input/output

Two high-performance 16550-compatible serial ports

PS/2-style keyboard and mouse ports on front panel

Built-in real-time clock and micro-speaker

Microprocessor

– The VMIVME-7740 brings the Intel Pentium III processor to VMEbus.

The VMIVME-7740 introduces the Intel Pentium III processor to the VMEbus with processor www.abb-drive.com speeds up to 850 MHz. the Pentium III processor has 32-bit addressing and a 64-bit data bus.

Its superscalar architecture allows three instructions per clock cycle. Dynamic branch prediction units, separate instruction and data caches, and MMX™ technology also increase processor performance.

The Pentium III processor also offers a 256 Kbyte Advanced Transfer Cache (on-chip, full-speed L2 cache) with dual independent bus architecture for high bandwidth and performance.

This L2 cache is clocked at the same frequency as the processor, which improves performance.

Memory

– The VMIVME-7740 accepts a 144-pin SDRAM SODIMM with a maximum memory capacity of 512 Mbyte.

The maximum memory capacity is 512 Mbyte. on-board DRAM is dual-ported to the VME bus.

BIOS

– The system and video BIOS is provided by reprogrammable flash memory.

Super VGA Controller

– High Resolution

The VMIVME-7740 supports high-resolution graphics and multimedia-quality video through the Chips & Technology AGP graphics adapter.

The adapter is complemented by 4 Mbyte of internal high-bandwidth 64-bit data interface synchronous DRAM.

The graphics adapter supports screen resolutions up to 1.600 x 1.200 x 64.000 colors (single view mode).

Ethernet Controller – The VMIVME-7740 supports Ethernet LAN through dual Intel 82559 Ethernet controllers.

Supports 10BaseT and 100BaseTX options through two RJ45 connectors. Remote LAN booting is supported.

Remote Ethernet Booting – The VMIVME-7740 utilizes Lanworks Technologies, Inc. BootWare to provide the ability to remotely boot the VMIVME-7740 using NetWare, TCP/IP, or RPL network protocols.

BootWare Features:

– Support for NetWare, TCP/IP, RPL network protocols

– Unrivaled boot sector virus protection

– Detailed boot configuration screens

– Comprehensive diagnostic capabilities

– Option to disable local boot

– Dual boot option allows user to select either network or local boot

Serial Ports – The VMIVME-7740 has two 16550-compatible serial ports on the front panel. The serial channel has a 16-byte FIFO and supports baud rates up to 56 kilobytes per second.

56 kilobytes per second. Two micro-DB9 to standard DB-9 adapters (VMIC P/N 360-010050-001) are required.

Keyboard and Mouse Interface – The VMIVME-7740 is equipped with a PS/2 combo keyboard and mouse interface. A Y adapter cable is included.

Flash Memory – The VMIVME-7740 provides up to 192 Mbytes of IDE CompactFlash flash memory, accessible through the auxiliary IDE port.The VMIVME-7740 BIOS includes an option to allow the board to boot from flash memory.

16-Bit Timers – The VMIVME-7740 provides the user with three 82C54-compatible 16-bit timers (in addition to the system timer). These timers are mapped to I/O space and are fully programmable by software.

Watchdog Timer – The VMIVME-7740 provides a software programmable watchdog timer.

The watchdog timer is enabled under software control. Once the watchdog timer is enabled, the on-board software must access the timer within the specified timer period or a timeout will occur. A user jumper allows the timeout to cause a reset.

Independent of the jumper, software can enable a watchdog timeout to cause a non-maskable interrupt (NMI) or VMEbus SYSFAIL.

Related Product Recommendations:

IC660TBD024K GeniusI/O Terminal Assembly Module

1769-OF8C Analog Output Module

350040M 176449-01 Proximity Monitor Module

2711P-T12W22D9P New HMIs

IC660TBD025 GeniusI/O Terminal Assembly Module

1769-OF2 Analog Output Module

2711P-T6C5A New Human Machine Interface

MPL-B580F-MJ72AA Servo Motor